background image

Page 12

For technical questions, please call 1-888-866-5797.

Item 56808 

        

SaFEty

OpEra

tiOn

MaintEnancE

aSSEMbl

y

Maintenance and Servicing

procedures not specifically explained in this manual  
must be performed only by a qualified technician.

tO prEVEnt SEriOUS inJUry FrOM acciDEntal OpEratiOn Or ElEctric SHOcK: 
release the trigger and unplug the appliance from its electrical outlet before 
performing any inspection, maintenance, or cleaning procedures.

tO prEVEnt SEriOUS inJUry FrOM tOOl FailUrE: Do not use damaged equipment.  
if abnormal noise or vibration occurs, have the problem corrected before further use.

cleaning, Maintenance and lubrication

1. 

bEFOrE EacH USE,

 inspect the general 

condition of the tool.  Check for:

•  loose hardware

•  misalignment or binding of moving parts

•  damaged cord/electrical wiring

•  cracked or broken parts

•  dull or damaged Saw Chain

•  any other condition that may 

affect its safe operation.

2. 

bEFOrE EacH USE, 

tension Saw Chain 

and add bar and chain oil to oil reservoir.  

3. 

pEriODically Or WHEn rEplacinG SaW 
cHain, 

turn the Guide Bar over to distribute the 

wear on it.   
Replace the Guide Bar when bent, cracked, or 
when the Saw Chain moves excessively from 
side to side on the Guide Bar due to wear

 (see 

Determining Guide bar Wear on page 13).

4. 

aFtEr USE:

a.  Remove Drive Cover, Saw Chain and Guide Bar.  

b.  Scrape debris loose from inside Drive Cover 

and around Drive Sprocket, then wipe with 
clean cloth and mild soap and water.  

Do not 

use solvents.  Do not immerse tool in liquid

.

c.  Remove sawdust and sap from the 

Guide Bar’s Groove using a bar groove 
cleaning tool (sold separately).

d.  Wipe Guide Bar with clean cloth, including oil 

passages, then lubricate with bar and chain oil.  

e.  Wipe debris from Saw Chain, then 

lubricate with bar and chain oil.  

f.  Replace Guide Bar, Saw Chain and Drive 

Cover, leave Saw Chain loose during storage.  

g.  Clean outside surfaces with a clean, dry 

cloth.  If necessary use mild soap and water.  

h.  Place Chain Cover over Saw Chain, 

then Store Pole Saw in a dry, secure 
location away from children.

5. 

WarninG!  tO prEVEnt SEriOUS 

inJUry:  if the supply cord of this appliance 
is damaged, it must be replaced only 
by a qualified service technician.

Summary of Contents for 56808

















Reviews: