background image

 

                                                                                                                 

15

Parameters: report time when moving, report time when stop, threshold speed, send stop 
report after a preset value and to choose the reports send or ignore. 
Report when speed less than a preset value (refer the following 1.5 Km/Hr), and it will send 
stop report after the preset time (refer the following 120Sec). (min. speed is 0.1 km/Hr, max. 
speed is 1000 km/Hr). 

 

(2)  Local Intelligent history report (record the report in the system’s flash ram) 

 

Parameters: Report time when moving, Report time when stop, and threshold speed. (min. 
speed is 0.1 km/Hr, max. speed is 1000 km/Hr). and to choose the reports send or ignore. 

 

(3)  A/D 1 detect report 

 

[on/off] SEND REPORT IF ADC1 LESS THAN [min voltage] V for [debounce time] SEC, 
RESEND PER [resend time] SEC                                     

 

[on/off] SEND REPORT IF ADC1 MORE THAN [max voltage] V for [debounce time] 
SEC, RESEND PER [resend time] SEC 

 

 

 

 

     

 

 

[on/off] SEND REPORT IF ADC1 GO UP [up voltage] V for [debounce time] SEC   

 

[on/off] SEND REPORT IF ADC1 GO DOWN [down voltage] V for [debounce time] SEC   

 

[on/off] SEND REPORT IF ADC1 ENTER/EXIT [min voltage] V TO [max voltage] V for 
[debounce time] SEC  
 
Note: AD1 input voltage range is 0~3.30v, it must connect a resistance to share the voltage 
if the detected voltage higher than 3.30v. 
 

Summary of Contents for GST8000



































Reviews: