You can switch between the operating modes by following the instructions below
:
1.
Select a previously programmed channel
.
2.
Press P2, the motor will make a single beep sound and move briefly UP and
DOWN
.
3.
Press UP, the motor will make a single beep sound
.
4.
Press P2, you will hear 3 beeps and the motor will move briefly UP and
DOWN
.
The remote operating mode change is complete. It affects all channels and remotes
assigned later
.
7. Changing the operating mode
The transmitter can work in three operating modes
:
MAN – manual mode – only manual
operating
is allowed
.
AUTO – automatic mode - active timer and manual functions.
AUTO – random mode – manual function active, whereas automatic functions are
activated with a time
difference
of +/- 15 minutes
.
MODE CHANGE
:
To change the operating mode of the device, press the M button
for at least 3 seconds
.
8. Functions of the device:
min. 3 seconds
6
