Software Instructions
FUDA2-S1x11 Series Panel PC User’s Manual
3-1
Chapter 3
Driver Installation and Touch Usage Guide
3.1 Driver Installation
All drivers are included in Panel PC Series V1.00 CD-title in the accessory box.
3.2 Calibration of the Touch Screen
Calibration aligns the active touch-sensitive area of the touch screen with the image
on the display. Calibration also determines the edges of the screen’s image and
locates the center of the touch screen. If the touch screen is not calibrated properly,
the active area of the touch screen may not be aligned with the screen’s image or may
be unnecessarily small in size.
1.
Make sure the touch driver utility is
installed properly
2.
Click [Start] to find the “eGalaxTocuh
Configure Utility”
3.
Click [About], you can see the
information and version of the “Touch
Screen Utility”
4.
Click [General], the installed USB
touch screen controller is shown.
