System Installation
FUDA3-S1x22 Series Panel PC User’s Manual
2-21
Cut-out Dimension
FUDA3
-S1x22
A(mm) B(mm)
C(mm)
D(mm)
Kits
10.4”
<10
52.5
265
222
X 8
12.1”
<10
52.4
289
244
X 8
15”
<7
50.6
367
293
X 14
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Installation Guide
1. Hook Clip
2. Screw the Clip tightly (Torque Value =
8kg )
3. Hook the mounting clamps with
screws (included) from the back side
Mount the system on a non-textured surface in order to ensure front sealing
against dust and water. Verify the perfect condition of the seal at the rear of
the front plate. The seal has to be in place without injury/defects and dirt.
