background image

System Installation 

PCOM-B217VG-II  

3-2

 

 

WARNING

 

Please ensure that SBC is properly inserted and fixed by mechanism. 
 

Note: 

Please refer to section 3.3.1 to 3.3.7 to install INF/VGA/LAN/Audio drivers. 
 

3.3.1 

Chipset Component Driver 

 
PCOM-B217VG-II uses state-of-art Intel® QM67 chipset. It’s a new chipset that some 
old operating systems might not be able to recognize. To overcome this compatibility 
issue, for Windows Operating Systems such as Windows 2000 /XP, please install its 
INF before any of other Drivers are installed. You can find very easily this chipset 
component driver in PCOM-B217VG-II CD-title 
 

3.3.2 

Intel Integrated Graphics 

 
PCOM-B217VG-II has integrated HD Graphic derived from Intel® Core(TM) 0series 
CPU (i5/i7) technology. It is the most advanced design to gain an outstanding 
graphic performance. Shared 128 accompany it to 256MB system DDR3-SDRAM 
with Total Graphics Memory. PCOM-B217VG-II  supports VGA, DVI, LVDS and 
LVDS dual display. This combination makes PCOM-B217VG-II an excellent piece of 
multimedia hardware. 

 

With no additional video adaptor, this onboard video will usually be the system 
display output. By adjusting the BIOS setting to disable on-board VGA, an add-on 
PCI-Express by 1 VGA card can take over the system display. 
 

Drivers Support

 

 
Please find all the drivers in the PCOM-B217VG-II CD-title. Drivers support 
Windows-2000, Windows XP. 

 

3.3.3 

Intel® PROSet Gigabit Ethernet Controller 

 
Drivers Support

 

Please find INTEL 82579LM LAN driver in /Ethernet directory of PCOM-B217VG-II 
CD-title. The drivers support Windows 2000/XP/Vista /Win7. 
 

3.3.4 Audio 

Controller 

 
Please find Intel® High Definition Audio driver form PCOM-B217VG-II CD-title. 
The drivers support Windows 2000/XP/Vista/Win7. 

Summary of Contents for PCOM-B217VG-II









































































Reviews: