BIOS Setup Information
PCOM-
B630VG User’s Manual
3.2
Main Memory
PCOM-B630VGVG provide 2 x 204 pin DIMM sockets (Dual Channel) which
supports Dual channel 1066/1333 DDR3L-SO-DIMM as main memory, ECC (Error
Checking and Correcting). The maximum memory can be up to 16GB. Memory clock
and related settings can be detected by BIOS via SPD interface.
For system compatibility and stability, do not use memory module without brand.
Memory configuration can be set to either one double-sided DIMM in one DIMM
socket or two single-sided DIMM in both sockets.
Beware of the connection and lock integrity from memory module to socket.
Inserting improperly it will affect the system reliability.
Before locking, make sure that all modules have been fully inserted into the card
slots.
Note:
To insure the system stability, please do not change any of DRAM parameters in
BIOS setup to modify system the performance without acquired technical
information.
3.3
Installing the Module upon the Carrier Board then into the
Chassis
To install your PCOM-B630VGVG into standard chassis or proprietary environment,
please perform the following:
Step 1:
Install well the PCOM-B630VGVG upon the Carrier Board, Cooler in its
correct position.
Step 2:
Check all jumpers setting on proper position.
Step 3:
Place the Carrier Board into the chassis and screw with the correct place.
Step 4:
Attach cables to existing peripheral devices and secure it
WARNING
Please ensure that SBC is properly inserted and fixed by mechanism.
Note:
Please refer to section 3.3.1 to 3.3.4 to install INF/VGA/LAN/Audio drivers.
3.3.1
Chipset Component Driver
PCOM-B630VGVG uses Intel Haswell QM87 chipset. It’s a new chipset that some old
operating systems might not be able to recognize. To overcome this compatibility
issue, for Windows Operating Systems such as Windows XP, please install its INF
before any of other Drivers are installed. You can find very easily this chipset
component driver in PCOM-B630VGVG CD-title.
Summary of Contents for PCOM-B630VG
