PNA-3303 User’s Manual
7
2. Connect the IDE cable and power connector to HDD (
Fig. 2-18
).
3. Fasten the screws to lock HDD and bracket together (
Fig. 2-19
).
Fig. 2-18
Connect power and IDE cable to
HDD
Fig. 2-19
Fasten the screws to fix HDD with
bracket
2.9 Remove and Install PCI card
One PCI slot is available to PNA-3303. Follow the steps below for installation:
1. Remove the PCI slot bracket (
Fig. 2-20
) and plug the PCI card into the PCI slot (
Fig. 2-21
).
Fig. 2-20
Remove the PCI slot bracket
Fig. 2-21
Plug in the PCI board
2. The PCI card’s bracket tip is placed in the chassis corner (
Fig. 2-22
). Fix the screws back to
the PCI card (
Fig. 2-23
).
Fig. 2-22
The PCI card’s bracket tip is placed
outside of the chassis corner
Fig. 2-23
Fix the screws back to the PCI card
