BIOS Setup Information
ROBO-679 User’s Manual
4-5
Menu seletions
Item
Options
Description
IDE HDD
Auto-detection
Press Enter
Press Enter to auto-detect the HDD on this channel.
If detection is successful, it fills the remaining fields
on this menu.
IDE Primary Master
None
Auto
Manual
Selecting ‘manual’ lets you set the remaining fields
on this screen. Selects the type of fixed disk. "User
Type" will let you select the number of cylinders,
heads, etc.
Note: PRECOMP=65535 means NONE !
Access Mode
CHS
LBA
Large
Auto
Choose the access mode for this hard disk
Capacity
Auto Display your
disk drive size
Disk drive capacity (Approximated). Note that this
size is usually slightly greater than the size of a
formatted disk given by a disk checking program.
The following options are selectable only if the ‘IDE Primary Master’ item is set to ‘Manual’
Cylinder
Min = 0
Max = 65535
Set the number of cylinders for this hard disk.
Head
Min = 0
Max = 255
Set the number of read/write heads
Precomp
Min = 0
Max = 65535
****
Warning
: Setting a value of 65535 means no
hard disk
Landing zone
Min = 0
Max = 65535
****
Sector
Min = 0
Max = 255
Number of sectors per track
StockCheck.com