BIOS Setup Information
ROBO-679 User’s Manual
4-7
L1 Cache/L2 Cache
These two categories speed up memory access. However, it depends on
CPU/chipset design.
Enabled
Enable cache
Disabled
Disable cache
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power up the
computer. If it is set to Enable, BIOS will shorten or skip some check items during
POST.
Enabled
Enable quick POST
Disabled
Normal POST
First/Second/Third/Fourth Boot Device
The BIOS attempts to load the operating system from the devices in the sequence
selected in these items.
The Choice: Floppy, LS120, ZIP100, HDD, SCSI, CDROM, LAN, and Disabled.
Boot Up NumLock Status
Select power on state for NumLock.
The choice: Off/On.
Security Option
Select whether the password is required every time the system boots or only when
you enter setup.
System
The system will not boot and access to Setup will be denied if
the correct password is not entered at the prompt.
Setup
The system will boot, but access to Setup will be denied if the
correct password is not entered at the prompt.
StockCheck.com
