WADE-8017
Copyright © Portwell 2016 WADE-8017
User's Guide
92
To make sure that you have a successful start with WADE-8017, it is recommended, when going with the boot-up sequence, to hit “delete ” or ” Esc” key and
enter the BIOS setup menu to tune up a stable BIOS configuration so that you can wake up your system far well.
Loading the default optimal setting
When prompted with the main setup menu, please scroll down to “Restore Defaults”, press “Enter” and select “Yes” to load default optimal BIOS setup. This will
force your BIOS setting back to the initial factory configurations. It is recommended to do this so you can be sure the system is running with the BIOS setting
that Portwell has highly endorsed. As a matter of fact, users can load the default BIOS setting at any time when system appears to be unstable in boot up
sequence.
8.3
FAQ
Information & Support
Question:
I forgot my password of system BIOS, what am I supposed to do?
Answer:
You can switch off your power supply then find the JP5 on the WADE-8017 board to set it from 1-2 short to 2-3 short and wait 5 seconds to clean your
password then set it back to 1-2 short to switch on your power supply.
JP5
:
:
:
:
CMOS Setting
Jumper Setting Describe
*1-2
Default
2-3
Clean CMOS
Summary of Contents for WADE-8017
