- 77 -
Rev. 1.50
A10plus MiniPrinter
CONFIDENTIAL
GS
＼
[Name]
Set relative vertical print position in page mode
[Format]
ASCII
GS
\
n
L
n
H
Hex
1D
5C
n
L
n
H
Decimal
29
92
n
L
n
H
[Range]
–32768 ≤ (
n
L
+
n
H
× 256)
≤ 32767
[Default]
None
[Description]
In page mode, moves the vertical print position to
(
n
L
+
n
H
× 256) × (vertical or horizontal motion unit) from the current position.
[Notes]
■ This command is enabled only in page mode. If this command is processed in
standard mode, it is ignored.
■ The printer ignores any setting that exceeds the print area set by
ESC W
.
■ A positive number specifies movement to the downward, and a negative number
specifies movement to the upward. N pitch movement to the downward:
(
n
L
+
n
H
× 256) = N. Use the complement of N for
setting N pitch movement to the upward: (
n
L
+
n
H
× 256) = 65536
– N.
■ The horizontal or vertical motion unit is used for the print direction set by
ESC T
.
• When the starting position is set to the upper left or lower right of the
print area using
ESC T
, the vertical motion unit is used.
• When the starting position is set to the upper right or lower left of the
print area using
ESC T
, the horizontal motion unit is used.
■ Even if vertical or horizontal motion unit is changed after changing the print position,
the setting of print position will not be changed.
■ “\” is corresponds to “\” in JIS code set.
