Eurekaweg 4 2991 ZB Barendrecht
T +31 (0)180 629009
www.poseidon-bv.nl
Ordernumber
Date
25-01-2015
Ref.erence
STA-STF
Version
2
Status
Final
Page
4
of
20
INTRODUCTION
This manual gives guidance for a professional installation, maintenance and disassembly
of the Poseidon Pegasus seals.
The instructions in this manual are accompanied, where necessary, by special symbols
indicating particular hazards.
Caution!
Danger to the product and/or other machines.
These hazardous situations can arise when:
•
Inadequately trained staff service the product;
•
The product is inexpertly installed, maintained or disassembled;
•
The product is used for purposes other than those for which it was
originally designed.
In addition to the above hazard symbols, additional information is accompanied by the
following symbol:
Extra information
All persons responsible for installation, maintenance or disassembly of the
product must:
•
Be familiar with the contents of this manual;
•
Have adequate technical skills.
Although the information in this manual has been composed and verified as accurately as
possible and the descriptions are as clear as possible, no liability can be accepted for
errors and/or deficiencies in the work done during maintenance, installation or start-up
procedures.
This document remains the property of Poseidon Propulsion B.V. All rights reserved. This
document or any part thereof may not be made public or disclosed, copied or otherwise
reproduced or used in any form or by any means, without prior permission in writing
from Poseidon Propulsion B.V.