8 Installation and Operating Instructions
Dual Access Granted
When
[1]
is programmed, two users are required to obtain Access Granted.
Each user must use a valid card, code or both depending on the Card/Code
Option set. Only one user is required to disarm a Panic Alarm.
Example: When the reader and the keypad are enabled, User 1 must
present a valid card and enter a valid code and then User 2 must present
a valid card and enter a valid code for Access Granted.
Dual Access Granted with Dual Panic Disarm
When
[2]
is programmed, two users are required to obtain Access Granted
(same as
Dual Access Granted
) and two users are required to disarm a
Panic Alarm.
For example, a Panic Alarm is triggered, User 1 must present a valid card
and enter a valid code and then User 2 must present a valid card and enter
a valid code to disarm the alarm.
SECTION [004] DISPLAY ON CARD READ
The visual feedback when a card is presented to the reader can be
adjusted according to the installation’s requirements. Option [3] by default.
Enter Description
[0]
Display on Card Read disabled
[1]
Red Status LED flashes
[2]
Green Status LED flashes
[3]
Red and green Status LEDs flash
[4]
Face Light flashes
[5]
Face Light and red Status LED flash
[6]
Face Light and green Status LED flash
[7]
Face Light and both Status LEDs flash
