Part 6
can find a control board in the bottom. The lay out of the control
board is illustrated below.
2).
By switch setting at different positions of JP1, interface selection
between RS232 and USB and PID selection can be made.
a.
Interface select:
switch position 1 of JP1 defines interface of the cash
drawer besides the interface cable used. When switch position 1 is
ON, the controller responds to RS232 signals. When switch position 1
is OFF, the cash drawer works to USB interface.
b.
USB PID select:
Switch positions 2, 3 or 4 define a drawer number
for the cash drawer as in below table so that this cash drawer is going
to respond accordingly in USB communication. Please note that
within each system there should never be any 2 USB interface cash
drawers carrying the same drawer number.
USB PID
JP1 SW
1
2
3
4
5
6
7
0
2
ON
ON
ON
OFF
OFF
OFF
OFF
ON
3
ON
OFF
OFF
ON
ON
OFF
OFF
ON
4
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Default setting: Drawer 7 (SW2: OFF; SW3: OFF; SW4: OFF)
UPOS and WEPOS driver application:
Please first find in Posiflex Product Information CDROM or
download from Posiflex web sites for UPOS driver setup. In this application
CR-2204 responds to OpenDrawer command only; CR-2200/2204 are
compliant to UPOS version 1.7 and CR-2205 is compliant to UPOS version
1.8 and is also WEPOS certified.
JP1
1
2
3
4
O
N
