background image

 

 

Part 1 

 
 
 
 
 

FCC Notes: 

This  equipment  generates,  uses,  and  can  radiate  radio  frequency  energy  and,  if  not 
installed  and used  in  accordance  with  the  instructions  manual,  may  cause  interference 
to radio communications. It has been tested and found to comply with limits for a Class 
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to 
provide  reasonable  protection  against  interference  when  operated  in  a  commercial 
environment.  Operation  of  this  equipment  in  a  residential  area  is  likely  to  cause 
interference in which case the user at his own expense will be required to take whatever 
measures to correct the interference. 

Warranty Limits: 

Warranty terminates automatically when any person other than the authorized  
technicians opens the machine. The user should consult his/her dealer for the problem 
happened. Warranty voids if the user does not follow the instructions in application of 
this  merchandise.  The  manufacturer  is  by  no  means  responsible  for  any  damage  or 
hazard caused by improper application. 

About This Manual: 

Posiflex Technology, Inc. has made every effort for the accuracy of the content in this 
manual.  However,  Posiflex  will  assume  no  liability  for  any

 

technical  inaccuracies  or 

editorial  or  other  errors  or  omissions  contained  herein,  nor  for  direct,  indirect, 
incidental,  consequential  or  otherwise  damages,  including  without  limitation  loss  of 
data or profits, resulting from the furnishing, performance, or use of this material.

 

This  information  is  provided  “as  is”  and  Posiflex  expressly  disclaims  any  warranties, 
expressed,  implied  or  statutory,  including  without  limitation  implied  warranties  of 
merchantability or fitness for particular purpose, good title and against infringement. 
The  information  in  this  manual  contains  only  essential  hardware  concerns  for  general 
user  and  is  subject  to  change  without  notice.  Posiflex  Technology,  Inc.  reserves  the 
right  to  alter  product  designs,  layouts  or  drivers  without  notification.  The  system 
integrator shall provide applicative notices and arrangement for special options utilizing 
this product. The user may  find the most up to date information of the hardware from 
web sites: http://www.posiflex.com or http://www.posiflex.com.tw or  
http://www.posiflexusa.com 
All  data  should  be  backed-up  prior  to  the  installation  of  any  drive  unit  or  storage 
peripheral.  Posiflex  Technology,  Inc.  will  not  be  responsible  for  any  loss  of  data 
resulting from the use, disuse or misuse of this or any other Posiflex product. 
All  rights  are  strictly  reserved.  No  part  of  this  documentation  may  be  reproduced, 
stored  in  a  retrieval  system,  or  transmitted  in  any  form  or  by  any  means,  electronic, 
mechanical,  photocopying,  or  otherwise,  without  prior  express  written  consent  from 
Posiflex Technology, Inc. the publisher of this documentation. 

©

 Copyright Posiflex Technology, Inc. 2012

 

All brand and product names and trademarks are the property of their respective holders.

 

FT-7715 

Fan Free Touch Control 

Desktop POS Terminal 

User’s Manual

 

Rev.: Original 

P/N: 16620900010 

Summary of Contents for FT-7715



















Reviews: