Loading 2” or 3” Paper Rolls
Before operating the printer, please follow the below steps to load a paper roll.
1.
To open the paper roll cover, push down the
paper roll cover release lever in the direction
shown in the figure.
2.
Before installing
2-inch paper roll
in the thermal printer, place paper
separator in the paper roll compartment by following the instructions
below. If you are using 3” paper roll for the printer, please skip to
next step.
2.1.
Hold the separator with the sharp-
pointed side down.
2.2.
Push the sharp-pointed part of paper
separator into the slot on the bottom
of the paper roll compartment.
2.3.
Slide another side of paper separator into the slot on the top
of the paper roll compartment.
2.4.
Drop 2-inch paper roll inside the
paper roll compartment.
6
