3.
To load the thermal printer with
the 3-inch
paper roll
, just drop the thermal paper roll
inside the paper roll compartment of the
printer as illustrated in the figure.
4.
Unroll the thermal paper and drag the loose
end of the paper till it extends towards the
paper cutter.
5.
Make sure the loose end sticks out of the
opening of the paper roll compartment. Then,
close the paper roll cover by pushing it back
at the center of the top side of the cover with
a click sound.
6.
Make sure the paper roll is well loaded with
the end of the paper sticking out as shown in
the figure.
To avoid paper jam or other printing errors, do NOT
press the paper roll cover release lever during printing.
Paper cutter
7
