Part 4
THE STANDARD FEATURES
CPU:
VIA C7 1 GHz
; HDD:
40 GB or above;
RAM:
256 MB DDR2
upgradeable to 2 GB max.
Ethernet Networking:
The standard network port works with both 10 Base T
and 100 Base T.
Serial Ports:
There are 4 serial ports in a HT-2212 Pro system. COM1 is
shared by the direct driven cash drawer port and the UPS function. Each COM
port is capable of providing independently a +5 V DC or a +12 V DC supply.
All these DC supplies are achieved through internal jumper setting and they
are all defaulted to give
no
DC supply at delivery.
Parallel Port:
Each HT system is equipped with a parallel port that supports
SPP/EPP/ECP.
VGA Port:
There is a VGA connector for connection of external monitor with
+ 12 V DC power support capability after jumper setting change.
USB Ports:
The HT-2212 Pro series is equipped with 6 USB type A
connectors for connection of USB (Universal Serial Bus) devices. One of the 6
ports is extended to one top edge of case for easy connection to the integrated
upgrade kit BC-300 or SD-300.
CR Port:
Capable of controlling 2 cash drawers through use of optional cable.
Modem Ring -Up, LAN Or Alarm Wake-Up:
The HT-2212 Pro series can be
turned on automatically upon an incoming COM port Modem call or LAN
status or data packet received on LAN or a preset time/day/week/month.
Built-in UPS function
to support the system from intermittent power failure
(battery itself is an option)
Accidental power off protection
– The power switch is safely located at one
side, and this power switch can be defined as a “ON” switch only through
software command.
THE OPTIONAL ITEMS
Note:
Underlined items below must be installed prior to delivery from factory.
Attempt to apply them by end users is either too difficult or is likely to cause
damages. Italic items below are stand alone peripheral devices.
a)
DRAM Memory Expansion:
Upgrade up to 2GB max. in 2 DDR2
modules
b)
2
nd
HDD:
2.5” IDE interface
c)
Compact Flash Memory Card Slot:
Type I
d)
Touch panel:
Option to have the set without touch panel
e)
Side Mount Integrated Upgrade Kit: (BC-300)
Bar code card reader
or
(KP-200)
programmable keypad or
(SD-300)
security device:
The
KP-200 may contain a
MSR
with choice among 2 tracks or 3 tracks in
ISO standard or JIS I/II (JIS MSR for factory upgrade only) and a
smart card reader
. The SD-300 may contain a
MSR
and an
optical
