HT-4600/PB-4600 series Technical Manual 38
\Drivers\KP\uKBW.xxx (for KP-200U) in Posiflex product information CD is the
subfolder for executing the “SETUP.EXE” to install this utility. There will be a
warning screen before the screen shot similar to the picture at above right to ask the
user not to disturb the keyboard initialization when this utility is engaged. To edit the
content for a specific key please select the position from the key map after the warning
screen disappears. The color of that key will change and the content entered in the
editing area will be accepted for its content to be programmed.
THE COMMAND MENU
In the command menu, there are “File”, “Keyboard”, “Edit”, “Config”, MSR”,
“About”, “Help” and “Exit”. The “File” menu can be used to open an existing
template file to be edited in this utility or to save the edited result into a template file
or to exit this utility. The “Keyboard” menu can be used to read the current content in
the programmable keypad to be edited in this utility or to write the edited result into
the programmable keypad. The “Edit” menu helps the editing operation like copy,
paste or clear the programmed content of a programmable key. Please ignore any gray
command relating to “Page” that is applicable only to other models of Posiflex
programmable keyboard and remains here only for consistency consideration. Same
comment applies to the gray “View” menu. The “Config” menu determines the
keypad beep response and the “InterCharacter Delay” of the keypad output. The
“MSR” menu in the keyboard programming utility was reserved for some earlier
infrastructure and should not be used. Please use the (USB) MSR Manager for MSR
setup as in above section. The “About” menu provides information of this utility itself.
The “Help” menu explains the contents in next paragraph. The “Exit” provides the
termination of this utility.
SPECIAL CONTENTS
One of the features that a Posiflex programmable keyboard / keypad outclasses other
competitors is that the contents to be programmed is not limited in those displayable
characters only. The programmable content includes those editing keys such as arrows
on a usual PC keyboard and function keys such as F1 to F12, “Shift”, “Esc” etc. and
even a programmable delay time. In the editing area, click the right button of a mouse,
a multilevel menu will appear for selection of these special contents.
