HT-4600/PB-4600 series Technical Manual 59
EXTENDED PCI RISER CARD
To apply any PCI extension riser card, please
remove the red circled PCI I/O bracket screw and
take out the arrowed PCI I/O bracket that is
holding the arrowed PCI I/O plate in place as in the
upper right pictures.
Please install the PCI adaptor board to the PCI slot
first as showed in the second picture in the right.
Next, in case of installation of PA-4200 PCI card,
please plug the PCI card to the riser card and fix to
the I/O plate as arrowed in the third picture in the
right.
Fix the PCI I/O bracket screw back to the original
screw holes and reboot the terminal then the
function of PCI card can be use.