KS-6615 / KS-6617 series Technical Manual 5 - 9
\Drivers\KS661X\LAN_xxx and execute this file on the target machine. Select the item
“View Current Configuration” in the Main Menu and write down the 6 2-digit numbers
of the item “Ethernet Address:” for the network technician. Then the target machine
should be powered off in a normal way with AC power supply and LAN connections.
Now the networking technician at the master machine can execute the same file
“RSET8168.EXE” and select “Run Diagnostics”
à
“Run Power Management Test”
à
“Master Machine”
à
“Magic Packet”. There will popup a dialog box. Enter the
registered 6 2-digit Ethernet Address of the target machine and press “Enter” then the
target machine of that Ethernet Address will be automatically powered up.
FINGERPRINT SENSOR
When the system is delivered with SD-400T with fingerprint sensor and when
the system has preloaded OS, the driver for the optical fingerprint sensor will be
installed for separated demonstration on use of the fingerprint sensor. For software
developers to use all functions of the sensor in their AP, proper SDK (software
development kits) should be purchased from the sensor module supplier. The supplier
for the sensor module used in SD-400T is DigitalPersona, Inc. and the module used is
“U.are.U 4000B”. It is advisable to visit their web site:
http://www.digitalpersona.com/developers/products.php
