Part 9
CABLE PASSAGE
Please route all cables through the cable passage to main unit in
desktop mount application. Hold them together with the cable tie. Pass all
cables (but those for HDD and UPS battery) through the cable exit to external
connections. For slim base models in desktop mount application, when cable
connection through a hole on desktop underneath the system is required, please
slide open the auxiliary cable exit on bottom plate and route all external
connections through this auxiliary exit. Then fix back the bottom plate if there
is no option unit to install.
INSTALLING UPS BATTERY
The optional UPS battery is delivered in the carton if it is ordered. For
slim base model, please place the UPS battery in the
direction shown in the right picture and use the Velcro
strap through the 2 standing slits on base box to fix the
battery in position firmly. Route the battery connection
cable through appropriate passage to the battery connector
on the main unit.
Please remove the UPS
battery bracket fixing screw and slide right the UPS
battery bracket to take it out for universal base model as
in left picture. Put the battery in at the other end first and
remount the bracket with its tongue matching under a
bridge in the wall of base box from the right as arrowed
in above left picture then apply the fixing screw. Please
1. Cable Exit For External Connections
2. Base Box Screw
11. UPS Battery
3. Cable tie
4. Cable Passage To Main Unit For
Desktop Mount Application
6. Cable Passage To Main Unit For
Wall Mount Application
7. HDD Bracket
5. HDD Bracket Fixing Screw
8. Power Adaptor Bracket Fixing Screws
6. Power Adaptor In Universal Base
9. UPS Battery Bracket 10. UPS Battery Bracket Fixing Screw
12. Velcro Strap
6
1
8
4
10
6
9
3
11
7
5
2
8
Inside universal base
2
