background image

Part 1

I. FEATURES 

Most stable 15” LCD monitor with tilt adjust for 
industrial and commercial use. 

Application covers POS, Factory Automation etc. 

High quality 15” TFT LCD panel with scaling function for full screen 
display 

Easy maintenance structure allowing easy cleaning 

Tilt adjustable yet robust and wobble free construction 

Recommended LCD resolution: 1024 x 768 

Resistive type extra long life touch panel in USB interface supports touch 
panel function including left/right button, double click, drag & drop(For 
TM-7115/7115N) 

Touch beep can be pitch adjusted/enabled/disabled by software control(For 
TM-7115/7115N) 

Connect to host through VGA port plus USB port (for all models) and/or 
COM port (for TM-7115/7115N’s RS232 touch model only) 

Support 2 downlink USB ports 

FCC NOTICE

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class 
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against 
interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause 
interference in which case the user at his own expense will be required to take whatever measures to correct the interference. 

WARRANTY LIMITS

Warranty will terminate automatically when the machine is opened by any person other than the authorized technicians. The user 
should consult his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of 
this merchandise. The manufacturer is by no means responsible for any damage or hazard caused by improper application. 

ABOUT THIS MANUAL

This manual assists the user to utilize the Touch Monitor TM-7115 & TM-7115N. This product provides exquisite touch control 
capability over a stable and adjustable LCD monitor with minimal footprint. 

The manufacturer of the LM-/TM-7115/7115N touch monitor heartily apologizes to the user for reserving the right to change or to 
modify this manual without notice due to the rapid and constant progress and improvement on science and technology. The user 
may always obtain the most up to date information through any of our web sites: http://www.posiflex.com, 
http://www.posiflex.com.tw, http://www.posiflexusa.com.

©

 Copyright Posiflex Technology, Inc. 2010 

TRADE MARKS AND SERVICE MARKS

POSIFLEX is a registered trademark of Posiflex Technology, Inc. 

Other brand and product names are trademarks and registered trademarks and service marks of their respective owners. 

P/N: 

19690900030

LM-/TM-7115/7115N

LCD Touch Monitor

User’s Manual

Rev. B0

Summary of Contents for LM-7115













Reviews: