background image

 

 

Part 5 

1). PP-2000 series: Friction type paper feed, 2 stations 9 pin dot matrix 

impact printer. 

2). PP-5600 series: Friction type paper feed, 9 pin dot matrix impact 

printer 

3). PP-5700 series: Sprocket type paper feed, 9 pin dot matrix impact 

printer 

4). PP-7000II series: Friction type auto- paper feed, High-speed thermal 

sensitive line dot printer 

5). PP-7000IIUSB series:  Friction type auto- paper feed, High-speed 

thermal sensitive line dot printer with USB interface 

6). PP-7700 series: Friction type auto- paper feed, High-speed thermal 

sensitive line dot printer with wireless interface. 

e) 

Variety of Key Tops: 

1). Quad key 
2). Horizontal double key 
3). Vertical double key 
4). Single key 
5). Blank key 

f) 

DRAM Memory Expansion: 

Upgrade up to 1GB max.

 

g) 

Integrated CD-ROM Drive: 

Can be ordered before delivery or as an 

upgrade kit to be installed into the already purchased PST product.

 

h) 

Integrated FDD: 

3.5” 1.44 MB

 

i) 

Power management kit with CR port: 

The most advanced UPS 

functions to safeguard the POS operation against intermittent power 
failure with another option UPS battery, careless touch on the power 
switch, unmanned remote account consolidation operation, etc.

 

j) 

2-in-1 Cash Drawer Control Cable: 

Cable CCBLA-238, when added 

to the optional  CR port of the PST7 700, can be used to control two 
Posiflex CR-3X00 or CR-4XX0 cash drawers.

 

k) 

UPS Battery: 

2.3 AH 12V lead acid battery

 

l) 

Preload OS: 

Win98, Win 2000, Win XP embedded, Win XP pro.

 

SYSTEM BOX CONTENTS 

When you receive the system box you will find it contains seve ral items: 

PST7700 system unit 

Cashier display carton for LCD model PST7705 or PST7735 

Customer display carton if an option of customer display is ordered 

PST accessories carton 

Other optional components as ordered 

Main System Unit 

The main system unit is  supplied with the key tops of the 

programmable keyboard assembled without the transparent key caps. 

Summary of Contents for PST - 7700





















Reviews: