Routing and Arranging Cables
Each base stand features its own cable management to help you well organize
the cords whenever you need to connect peripheral devices to XT-5415/5615.
Based on different base stands, the following provides some useful cable-
routing instructions required to manage your cables.
For Gen 7E Base Stand
1.
Lay the terminal with its rear facing
towards you and tilt the screen all the way
down.
2.
Remove the cable cover.
3.
Pull outwards the locking levers with your
forefingers and then remove the cover in
the direction shown by the arrow.
4.
Positon your terminal with the bottom
facing you. Then, pass the cord through the
cable exit from the bottom side.
5.
Place the terminal with the rear facing
towards you. After tilting the screen to the
horizontal positon, route the cable along the
cable passage and through the cable exit.
Cable Exit
Cable Exit
12
