14
ASSEMBLY
Safety During Installation
TO AVOID DAMAGE
• Do not install the chair in an area of high humidity, such as a bathroom or sauna.
• Do not use the chair in an excessively humid or dusty environment as this may result in malfunction
or electric shock.
• Do not use the chair in a room with a temperature of 104 degrees or higher.
• Do not expose the chair to heaters, stoves, or direct sunlight.
• Keep fire sources, such as cigarettes and ashtrays, away from the chair.
• Ensure chair is installed on a flat and level surface to avoid tipping over.
• As the chair is heavy, please exercise extra care not to damage the floor when positioning the chair.
CAUTION
Assembly Preparation
• Ensure there is an allowance of at least 4” (10 cm) behind, and 12” (30 cm) in front of the chair to allow
the backrest to recline and the leg rest to extend without obstruction during operation.
• Maintain a minimum distance of 3’ (92 cm) from AV devices, such as a TV or radio, to prevent
signal interference.
• It is recommended that a carpet be placed under the chair to prevent scratching the floor and to reduce
noise during operation.
• As the chair is heavy, please exercise extra caution.
