17
ASSEMBLY
Assembling the Chair, continued...
STEP 6
Set the back/seat pad in place on the chair base.
Connect the heat connector on the seat pad to
the connector on the base.
STEP 7
Secure the back/seat pad in place by zipping
the four zippers.
STEP 8
Attach the head pillow to the back pad pillow
by zipping the two together (Figure A), then place
onto the chair (Figure B).
STEP 5
Secure each armrest to the base of the chair
using a bolt, nut, and the provided T-wrench
tool. Secure at front and back of each arm.
Note: If screws are installed at an angle, the
threads will be ruined.
STEP 4
Connect the airline and electrical connector
from each armrest to the base of the chair. (You
may need to move hip air bladders toward center
of the seat to see connection points on base.)
Connector
Insert zipped
pillows through loop
[A]
[B]
1
2
3
4
