GAM Quick Installation Guide
Positron Access Solutions
29
Document 180-0212-001 R02
connect to the OSP or its wiring. These interfaces require isolation from the
exposed OSP cabling. The addition of Primary Protectors is not sufficient
protection to connect these interfaces metallically to OSP wiring. Connection to
these ports should be for temporary use during installation or maintenance.
THIS PRODUCT IS SUITABLE FOR MOUNTING ABOVE GROUND OR UNDER
GROUND AT A MAXIMUM DEPTH OF 3 FEET. THE UNIT MUST ALWAYS BE
CONNECTED TO EARTH GROUND FOR SAFETY OF EQUIPMENT AND
PERSONEL.
WARNING:
Under some installation and/or climate conditions the outdoor GAM
equipment can become hot, do not touch. In order to prevent injuries, equipment
shall be handled only by qualified personnel wearing safety gears.