Postium OBM-U090, User Manual

OBM-U Series

4K LCD Professional Monitor

with 12G-SDI,  Quad Link  4K

7

 D : Rotary encoder

[BRIGHT] knob

      Press this knob to display the adjustment screen and adjust the picture brightness. Press again to hide the 
      adjustment screen. Turn the knob right to increase the brightness and turn le  to decrease it.
   

[CONTRAST] knob

      Press this knob to display the adjustment screen and adjust the picture contrast. Press again to hide the 
      adjustment screen. Turn the knob right to increase the contrast and turn le  to decrease it.
    

[CHROMA] knob

     Press this knob to display the adjustment screen and adjust the color intensity. Press again to hide the 
     adjustment screen. Turn the knob right to increase the color intensity and turn le  to decrease it.
   

[APERTURE] knob

     Press this knob to display the adjustment screen and adjust the picture sharpness. Press again to hide
     the adjustment screen. Turn the knob right to make the picture sharper and turn it le  to make the 
     picture so er.
     **Note: If you push the knob for 2 seconds, the adjusted value returns to the default value.

E : Menu Opera on Bu ons

     Displays or sets the on-screen menu.    
   

[MENU/RETURN]

     - Ac vates and deac vates the display of the Main Menu.
     - When the on-screen menu is not displayed, if this bu on is pressed the main menu is displayed.
     When the menu is displayed, press the bu on to return to the previous menu.
   

[SELECT/VOLUME] knob (Menu selec on control)

     - When the menu is displayed, turn the knob to select a menu item or a se ng value, and then press the
      knob to confirm the se ng.
     - If this knob is pressed when the menu is not displayed, the adjustment screen of [VOLUME] is displayed
      to adjust the audio volume.
     - Press this knob to change the modes in the order of [Focus Frequency], [Zebra Level], [Line Posi on], 
      [Variable Marker] and adjust each mode’s value.
      [Focus Frequency]:  When Focus Assist func on is ac vated, this mode is displayed.
      [Zebra Level]: When Zebra func on is ac vated, this mode is displayed.
      [Line Posi on]: When WFM/Vector func on and Line Select func on is ac vated, this mode is displayed.
      [Variable Marker]: When Marker func on is ac vated and Aspect Marker is set Variable, this mode is displayed.

F :      (Standby) Switch and Indicator

    - Press to turn the power on when this monitor is in standby mode. A er being turned on, the monitor   
      performs ini aliza on and the indicator flashes in green.
    - Press the switch again for a second to set the monitor in standby mode. Then, the indicator flashes in
     orange and then turns red. The indicator in orange means that the monitor goes into the standby
     mode.
     When the indicator flashes in orange, this bu on doesn’t work.    
 
 

G :        (headphone) Jack and USB Connector

Headphone Jack

    - The audio signal which is selected using the input select bu on is output in stereo sound form speakers.
    - When SDI signals are input, the audio signals of the channels selected with SDI Audio Se ng in the User
      Configura on menu are output.
    - When the headphone is connected to the        jack, audio signals will not be output 

from speakres.

[USB] Connector

    - To update CPU, GPU, FPGA program.
    - To connect the monitor with the Color Calibra on program provided by the manufacturer and perform
      the color calibra on.
    - To connect the monitor with the control program provided by the manufacturer and control func ons
      remotely.
    - To impot the custom 3D LUT file(*.cube, 

32^³, 33^³, 64^³ and 65^³).