3
A. Fitting the EvacuRite chair bracket to a wall
NB: The EvacuRite chair should not be sited outside.
1. Carefully remove the EvacuRite chair, wall bracket and cover from the box.
2. After choosing where the chair will be kept, fix the bracket onto the chosen wall using
appropriate screws and rawl plugs for the type of wall, so that the:
- Distance from the floor to the centre of bracket holes is 955mm - see Fig A.
When attaching to a plasterboard wall, the centre of the bracket should be screwed into the wall’s
wooden joists. If wooden joists are not found, suitable rawl plugs and screws should be used to
achieve a firm fixing of the bracket to the wall.
3. Once the wall bracket is in place, keeping the chair closed, with the black tracks facing the
wall, push the green brake handle bar into the two clips on the bracket. The clips on the wall
bracket will fit between the brake levers.
4. Ensure that the black curved handles are facing forwards. The black retaining knobs will click
shut to secure the black handles in the forward position. It may be necessary to slightly lift and
adjust the black handles by a small amount to achieve this secure location.
5. Position the cover neatly onto chair. Once this instruction booklet has been thoroughly read,
locate the serial number of the chair (found on the brake handle bar) and note into the available
space on page 11.
6. Please keep this manual safe by inserting into the clear pocket on the top of the cover.
Fig A
W
ALL
955 mm
2
4
