www.POTANE.com
Customer Service: support@potane.com
08
How to
1.Make a Bag from a POTANE® Roll
1. Plug the cord into an electrical
outlet, wait 5-7 seconds until
the green light on "Dry" is on.
2.Use a scissor/cutter to cut enough
bag material from a roll to hold
the item. Be sure to cut 3 more
inches for seal and keep the bag
straight.
3.Open appliance lid. Insert one
end of bag material across
Sealing Strip.
4.Press down the lid of the
machine firmly until you hear
locked sounds from both sides.
5.Make sure the food type must
be on "DRY". Then press the
"Seal Only" button.
6.When "Seal Only" Indicator
Light turns off, sealing is
complete. Press the release
buttons to open the lid. Lift the
lid and remove the bag.
Now you are ready to vacuum seal
with your new bag (see next page)
2
3
4
5
6