3-19
PFC-6030 • 5403595 • REV C-1 • 10/13
Single Action / Dual Action Pull Station (APS-SA / APS-DA)
The APS-SA/DA addressable pull stations are non-coded that provide an addressable point to the panel. The APS pull stations
have terminals that allow the SLC to be wired directly to the device and then exit to the next device in the loop. Refer to the
wiring example shown below.
Figure 21. Example of Addressable Pull Station Wiring
DWG #593-36
FACTORY WIRED
CONTACTS
From FACP or Previous Module
To Next Module
SLC Loop
S-
S+
C
NO
Model No. APS-SA/DA
Addressable Pull
Station - Single Action/
Dual Action
