5-50
PFC-6030 • 5403595 • REV C-1 • 10/13
File New
The
File New menu option
is used to complete all programming from scratch on the computer. You must select the correct panel
model prior to programming.
Note
: It is imperative that you choose the correct panel model
prior
to programming or completing any data transfers,
otherwise, you cannot complete a successful download to the panel. If this occurs, you will have to reprogram the entire
panel.
Figure 64. Example of File New Dialog Box
File Save / Save As
Once programming has been completed, save your configuration file using either the
"File – Save" or "File – Save As" function
.
An
audit
is performed that checks for rule violations; if errors are encountered, you may choose to either save with errors or
cancel the save operation.
Figure 65. Example of Save Panel Dialog Box
Notes
:
1.
All site specific configuration data is stored in the panel’s non-volatile memory.
2.
The next time you make programming changes, you may overwrite the original configuration file with changes. If you
choose to do this, you will lose the original programming report information.
3.
The panel configuration file has a .fpcf file extension.
Audit Errors
The
Audit Error - Save Anyway? dialog box
displays if programming errors are encountered when saving the configuration file.
You may choose to save the file with errors; however, you cannot download the data until all errors are corrected.
Figure 66. Example of the "Save anyway?" Dialog Box
