Water content of
the plant
[l]
Amount
Lasacor
®
LS 1
[l]
Water in the mixture
*)
[l]
Antifreeze to
[°C]
50
36
14
-15
100
71
29
-15
150
107
43
-15
200
143
57
-15
250
178
72
-15
300
214
86
-15
500
357
143
-15
1000
714
286
-15
*) The water for the mixture must be neutral (potable water quality with no more than 100 mg/kg chlorine) or
demineralised. Please also follow the manufacturer instructions.
4.4.4 Maintenance instruction
The water hardness of the heating water has to be checked within the scope of the
recommended maintenance of the boiler and, possibly, the respective amount of
additive has to be added.
4.5 Practical information for
heating contractors
1. With reference to the specific system volume (e. g. when using heating water
buffer cylinders), determine which requirements apply regarding total hard-
ness of the fill and top-up water to VDI Directive 2035 and the the following
table.
If partial softening to 6 °dH is insufficient according to the project-specific wa-
ter hardness diagram, use either an additive or use only fully desalinated water
(with pH stabiliser).
If a boiler is replaced in an existing system, we recommend installing a dirt trap
or filter in the system return, upstream of the boiler. Flush the system thor-
oughly.
2. Depending on the materials used, determine whether the addition of inhibi-
tors, partial softening or full desalination is the best method.
3. Record the filling process (use the BRÖTJE system log. If an additive is used,
note this on the boiler). To prevent gas pockets and bubbles, it is essential to
fully vent the system at maximum operating temperature.
4. After 8 to 12 weeks, check and record the pH value. Offer and conclude a main-
tenance contract.
5. Once a year, check the system is operating correctly with regard to pressure
maintenance, pH value and the volume of top-up water used.
Tab. 5: Table to VDI 2035 Sheet 1
Total heating output
in kW
Total hardness in °dH
subject to the specific system volume
< 20 l/kW
≥ 20 l/kW and < 50l/kW
≥ 50 l/kW
< 50
*)
≤ 16.8
≤ 11.2
< 0.11
50 - 200
≤ 11.2
≤ 8.4
< 0.11
200 - 600
≤ 8.4
≤ 0.11
< 0.11
> 600
≤ 0.11
< 0.11
< 0.11
*) for system boilers (< 0.3 l/kW) and systems with electric heating elements
Prior to installation
7308272-03 03.14
Paramount three 30-115 kW
21
Summary of Contents for Paramount 40
Page 1: ...Installation manual Gas condensing boiler Paramount three 30 115 kW ...
Page 23: ...Prior to installation 7308272 03 03 14 Paramount three 30 115 kW 23 ...
Page 25: ...Fig 5 Connection plan Prior to installation 7308272 03 03 14 Paramount three 30 115 kW 25 ...
Page 28: ...4 9 Legend Prior to installation 28 Paramount three 30 115 kW 7308272 03 03 14 ...
