Date: Oct.24, 2012
Page
3
of
6
Rev.
2. Attach 1pc of Leveler (S) to the Bottom Frame (E) using 4pcs of Small Phillips head screw 8x19mm (R), as
seen in the illustration below.
3. Tighten with a Phillips head screwdriver (not included).
4. Lay down Right Side Panel (D) and attach Bottom Frame (E), making sure the pre-drilled holes align.
5. Secure using 3pcs of Short Hex Bolt 1/4
”x32mm (K), 3pcs of Spring Washer (N), 3pcs of Flat Washer (O),
and tighten with Allen Key (T), as seen in the illustration below.
6. Attach Ladder (H) to Footboard (A).
7. Secure using 8pcs of Short Hex Bolt 1/4
”x63mm (J), 8pcs of Spring Washer (N), 8pcs of Flat Washer (O), and
tighten using Allen Key (T), as seen in the illustration below.
