Date: 9-June-2014 Page 1/2
pottery barn kids
CAROLINA KID CHAIR
PRE-ASSEMBLY:
For your safety and ease, assembly by two adults is recommended.
Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly when
used in conjunction with the assembly instructions.
Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface. The shipping
box provides and ideal work surface. Do not dispose of any contents until assembly is completed to avoid
accidentally discarding small parts or hardware.
Use the parts and hardware lists to identify and separate each of the pieces included prior to starting assembly.
Note: DO NOT fully tighten the bolts until all parts are in place AND alignment of legs is verified. Failure to
follow these instructions may cause the bolts to misalign during assembly and chair to sit unlevel.
If using power tools to aid in assembly please use caution. Power tools can damage hardware or split wood.
HARDWARE INCLUDED:
(D) Allen Key – 1pc
(E) Bolt ¼” x 65mm – 8pcs
(F) Spring Washer – 8pcs
(G) Flat Washer – 8pcs
ASSEMBLY INSTRUCTIONS:
1. Attach Seat (B) to Rear Leg Panel (A). Slide a Spring Washer (F) and a Flat Washer (G) onto each Bolt (E).
Insert (2) Bolts with washers from each triangle corner block under seat into pre-drilled holes on the Leg
Panel. Do not fully tighten.
B.
A.
A.
B.
C.
C.
HARDWARE LIST
PARTS INCLUDED:
(A) Rear Leg Panel– 1pc
(B) Seat – 1pc
(C) Front Leg – 2pcs
E
(4x)
