Date: 9-June-2014 Page 2/2
2. Align and connect Front Legs (C) to the Seat. Slide a Spring Washer (F) and a Flat Washer (G) onto each
Bolt (E). Insert (2) bolts with washers from triangle corner block under seat into pre-drilled holes on one
Leg (C) using Allen Key. Repeat with the other leg. IMPORTANT: DO NOT FULLY TIGHTEN BOLTS
BEFORE STEP 3
3. Place chair on floor to ensure all legs are securely on the floor. Adjust alignment as needed and tighten all
connecting bolts.
CARE INSTRUCTIONS:
Dust often using a clean, soft, dry lint-free cloth.
Blot spills immediately, and wipe with a clean, damp, cloth.
We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
Thank you for your purchase.
stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
C.
C.
E
(4x)
