Date: 21‐Jul‐14
www. potterybarnkids.com
Page 9 of 14
Rev:
3.
Determine the desired height of the mattress base. Using two adults carefully place
mattress base into the crib taking care not to scratch the finish.
Note:
The mattress base may be at the highest level when the child is born. It must be at the
lowest level before the child can stand up. Before installing the mattress base, please ask the
customer at which height they want it installed (Illustration showing Mattress base install in
the highest position).
Attach the Mattress Base (PART 6) to Crib Ends (PART 3 and 4) using the Bolts (B) and the
Allen Key (F). Do not fully tighten Bolts (B) at this point to make installation of the Crib Front
easier.
To change the position of the Mattress Base, unscrew Bolts (B), line up the Mattress Base with
the holes at the desired height and re-attach the Mattress Base using the same bolts.
(B) Bolt- M6 x 20mm 4x
Installed in the highest position.
6
(B)
(F)
3
4
6
