Date: 7-December-2011 Page
4
of
7
Rev:
3.
Determine the desired location of the ladder opening (See options below).
4.
Fasten guardrails (D) and (E) to side rails (C) of upper bunk using Screws (R). The long guardrail goes on the back side rail
of the upper bed. Make sure there is no gap in between the other end of the short guardrail (D) and the bed end structure
(A) before you start screwing the brackets to the front side rail. Turn brackets on bottom of guardrails and secure to
underside of bed rails as shown. Use Phillips head screwdriver for tighten screws.
Note : Attach duardrail (D) and (E) to side rail (C),
Lossen screws at the bracket
Note : Put the screw (R) to the
Side rail (C) and tighten all
Together with screwdriver
(15x)
R
5x
(5x)
