Date: 7-December-2011 Page
5
of
7
Rev:
5.
Assemble Bed Slats-Long (K) to the Lower bed frame and Bed Slats-Short (J) to the Upper bed frame using RH Screws
(Q) as shown. Use Phillips head screwdriver for tighten screws.
6.
One after the other insert iron dowels (P) and Spacer (I) into top of post and top rail of each end of lower bed assembly.
Lift upper bed over bottom bed making sure dowels (P) and Spacer (I) are well inserted into bottom end of upper bed post.
Then, attach Small finials (G) into top of post remains of each end of lower bed assembly.
Q
(32x)
(2x)
P
2x
(2x)
2x
(32x)
