Date: 7-December-2011 Page
6
of
7
Rev:
7.
Fasten ladder (F) to front side rail (C) using Screws (R) as shown. Use Phillip head screwdriver for tighten screw.
8.
Lift upper bed end get off lower bed end. To convert bunk bed into two beds.
9.
Insert Finials (H) into pre-drilled holes ontop of lower bed posts (B). Concurrently, insert JCBC 8 x 16mm Allen bolts (M)
into top rail of each end of lower bed assembly as shown using allen key(S).
2x
R
(2x)
4x
2x
M
(2x)
