Thank you for your purchase
Page
4
of
5
Date: 9-Aug-2012
stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
4.
Assemble the Base (G) using JCBC Bolt M6 x 70mm (K), Lock Washer (N), Flat washer (O), and Dowel 8 x 30mm (R)
with the Allen key (M), as shown in the picture below.
5.
Position the Back Panel (H) on the Back of the Storage tower as shown in the picture below. Insert 26 of the 6x19mm
Screws (P) into the pre-drilled holes on the Back Panel (H). Tighten with a Phillips Head screw driver (not included).
（
K
）
4x
（
N
）
4x
（
O
）
4x
（
M
）
1x
R
O
N
K
M
（
R
）
4x
G
4x
（
S
）
1x
（
P
）
26x
26x
P
S
H
