Date: 2014-December-4
Rev:
Page 10 / 11
ASSEMBLY INSTRUCTIONS TO CONVERT CRIB INTO FULL SIZED BED (headboard only) WITH METAL
FRAME (sold separately).
With
the addition of a Metal Frame (sold separately), your Elliot 3-in-1 Crib Headboard can be utilized as a full sized
headboard. Follow the instructions below with 2 Adults:
1. Disassemble your crib or toddler bed and set all pieces and hardware aside in an organized manner.
2. Assemble the Metal Frame according to the instructions included with the frame.
3. Place the Appliqué (PART 6) over the pre-drilled hole on headboard posts and insert (2x) Bolt (N) from the other
side of the posts to secure the (2x) Appliqué using Allen Key (A).
4. Hold the Elliot 3-in-1 Crib Headboard upright near the desired location in the room.
5. Insert (4x) Bolt (N) into pre-drilled holes in the bottom back side of both legs. Attach and align the Metal Frame
onto Headboard leg bolts. Slide a Flat Washer (M), Spring Washer (L) onto each bolt from the other end and
tighten with a Nut (K), using Allen Key (A) and Wrench (I).
6
x
(N)
(K)
(M)
(L)
(I)
(N)
6
1
(N) Bolt M6x55mm – 6x
(K) Hexagon Nut
(M6) – 4x
(L) Spring Washer
(M6) – 4x
(M) Flat Washer
(M6) – 4x
2x
2x
Part 6). Applique – 2x
