Date: 2015-DEC-26 Page 4 of 8
Rev:
Assembly Instruction Steps:
1.
Attach (D) to (B) and (C) by aligning pre-drilled holes with wooden dowels as shown below
.
2.
Attach (A) to (D) by aligning pre-drilled holes with wooden dowels as shown below.
*Note: Do not fully tighten at this point.
(K) Long Bolt 8x
(N) Spring Washer 8x
(O) Flat Washer 8x
(L) Half-Moon Metal Block 8x
(K) Long Bolt 8x
(N) Spring Washer 8x
(O) Flat Washer 8x
(L) Half-Moon Metal Block 8x
8X
8X