Date: 2014-Nov.-18
Page 3 of 6
Rev:
Important Safety Instructions:
•
Please read all instructions carefully before assembling.
•
For your safety, assembly by two or more adults is strongly recommended.
•
Keep instructions for future use.
•
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
Pre-assembly:
•
Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as
this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
•
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware.
•
Use the parts and hardware lists below to identify and separate each of the pieces included.
•
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
•
The use of power tools to aid in assembly is not recommended. Power tools can damage hardware and split
wood.
•
Note: Do not fully tighten all the bolts until all parts are in place. Failure to follow these instructions may cause
the bolts to misalign during assembly.
A
B
C
D
E
F
HARDWARE INCLUDED:
(G) Allen Key – 1x
(H) Bolt M6x55mm – 20x
(I) Spring Washer M6 – 20x
(J). Flat Washer M6 – 20x
(K) Half-Moon Metal Block – 20x
(L) Long Wood Screw 4x30mm – 56x
Tools Required:
Philips Screwdriver (Not included)
PARTS INCLUDED:
(A). Front Gate Panel
1x
(B). Back Panel
1x
(C). Guardrail
2x
(D). Upper Side Rail
2x
(E). Lower Side Rail
2x
(F). Slat Roll
2x
