Date: 2014-Nov.-18
Page 6 of 6
Rev:
6.
Assemble Slat Rolls (F) to bed frames using Long Wood Screws (L). Tighten the screws with a Philips
Screwdriver (not included) as shown in the illustration below.
7.
Check alignments and fully tighten all connections at this time.
8.
Assembly is now complete.
Care Instructions:
•
Dust often using a clean, soft, dry and lint-free cloth.
•
Blot spills immediately and wipe with a clean, damp, cloth.
•
We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
•
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.
Thank you for your purchase
Stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
L
F
(L) Long Wood Screw 56x