Date: 2015-Sept-07
Page
3
of
3
Multiple
Art Consoles
can be combined together by following the assembly instructions below:
2.
Place the
Art consoles
in the desired location.
3.
Align the
Art consoles
together.
4.
Place Metal Bracket (A) over the pre-drilled holes, on the rear side of
Art Console
, as shown below.
5.
Secure with 4 Short Screws (B) and tighten with a Phillips Head Screw Driver (not included).
6.
NOTE: Installation of the Anti Tip Kit is REQUIRED. Please follow the separate instructions to secure the
Art
consoles
to the wall, by using the tipping-restraint kit included.
Care Instructions:
•
Dust often using a clean, soft, dry and lint-free cloth.
•
Blot spills immediately and wipe with a clean, damp, cloth.
•
We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
•
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary.
Thank you for your purchase
Stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
