Date: 2014-Sept-14
Page 5 of 8
Rev: 2015-Jan-13
11. Before attaching the Bridge to the 2 Tall Bookcases (
sold separately
), make sure the upper 4 holes on the Side
Panel of each Bookcase are drilled through. Follow separate assembly instructions of the Tall Bookcase.
12. Stand the Tall Bookcases upright and place the Tall Bookcases against the wall.
13. Determine the desired location of the Bridge.
14. With the help of another person, adjust the levelers located on the bottom of the Bookcases to keep the units
level.
15.
NOTE: Installation of the Anti Tip Kit is REQUIRED. Please follow the separate instructions to secure one Tall
Bookcase to the wall using tipping-restraint kit included
.
16.
Place the second bookcase approximately 47” from the first bookcase as shown below (The width of the Bridge
is marked as “L”45” as shown below).
LEFT
RIGHT
P
