Page 2/3
ASSEMBLY INSTRUCTIONS:
1. Attach both Side Rails (C) to the Headboard (A) and Footboard (B) by inserting the hooks at two ends of Side
Rail (C) into the slots on Headboard (A) and Footboard (B). Press down firmly to secure. Ensure that the
decorative molding at one end of side rail is continuous to the decorative molding on the Headboard (A).
Change the Side Rail (C) to opposite side if the decoration does not align. (Fig. 1)
2. Lay the Slat Roll (D) between the Side Rails (C). Insert the Wood Screws #8 x 25 mm (F) into the
pre-drilled holes on each rail and secure with Phillips Head Screwdriver. (Fig. 2)
B
C
A
F
D
Decorative molding at one end of side rail must be continuous
to the decorative molding on the Headboard (A).
Figure 1
Figure 2
